Single Cylinder

Model HC-400-16-20/ and -25

Working Capacity 400,000 lb. (1779 kN)
Static Load capacity 1,2000,000 lb. (5,338 kN)
Stroke 20ft (6.09 M) or 25ft (7.62 M)
Pressure Max. 2,400 psi 116.55 MPa)
Wet Weight (hung in derrick 46,000 lb. (20,865 kN)
(20ft stroke with rod end and travailing block)
Fully Retracted 31 ft (9.49 M)/ 36.1 ft (11.02 M)
Fully Extended 51 ft (15.59 M) / 61ft (16.64M)

Key Benefits

	Light Weight Compensators reduce wire line wear and minimize derrick structure.
	More Usable Derrick Height with single cylinder design.
	Compact Design features an integral traveling block.
	Hydraulic Lockup in Any Position allows faster, more flexible drilling operations.
	In-Line Load Path through a single cylinder yields lowest weight and high efficiency.

Dual Cylinder

Copy of Comp1.jpg (391920 bytes)

Model HC-800-2-1-20

Working Capacity 800,000 lb. (3555 kN)
Static Load capacity 1,6000,000 lb. (7,110 kN)
Stroke 20ft (6.09 M) or 25ft (7.62 M)
Pressure Max. 2,400 psi 116.55 MPa)
Wet Weight (hung in derrick 113,150 lb. (503 kN)
(20ft) with rod end and travailing block.)
Fully Retracted 51 ft (15.66 M) (20ft)
Fully Extended 71 ft (21.7 M) (20ft)

Key Benefits

	High Capacity 800,000 pound working and high efficiency satisfy to demanding requirements.
	Innovative Pneumatic/Hydraulic Power Combination provides positive control and flexibility.
	Hydraulic Lockup On Demand in any position allows faster drilling operations.
	Automatic Safety Arrest limits hook velocity and prevents equipment damage in event of drill string failure.
	Compact Design features an integral traveling block.